Stage Floor Protection in NYC
First Layer sprays temporary surface protection on your stage floor after hours, touches it up through the run and peels it off at wrap. We serve film, TV and theater productions in New York and the Northeast.
How does stage floor protection work?
Stage floor protection means covering the floor before the set goes in and uncovering it when the show is over. First Layer sprays a peelable protective film straight onto the finished floor of a stage, studio or theater in New York. For stage floors we use Peeltex Grey or White.
The coating dries into one sealed skin. Paint, scenic spills and dropped props land on the film, not on the floor. During the run we inspect it and touch up any worn spots. At wrap, the film peels off in one sheet and the floor is handed back. We apply after hours, so your crew never waits on us.
The Stage Floor Package is priced per production. A quote covers material, labor, mobilization and a minimum job charge. See all five packages.
One floor, four hand-offs
The film goes down before the first truck and comes up after the last strike. Here is the run from our side.
-
Before load-in
Apply
We walk the stage, test a small patch, then spray Peeltex Grey or White after hours.
-
Through the run
Touch up
We inspect the floor as the production goes on and repair worn or damaged spots.
-
At wrap
Peel
The film comes off in one sheet, with the paint and spills that landed on it.
-
At turnover
Hand back the floor
The stage is cleared and handed over, ready for the next production.
What stays out of the way
Hardboard and tape can shift, open at the seams and let water and dust underneath. The film is sealed and contains spills, so the floor stays out of the way of your set, your crew and your schedule. For traction, we broadcast fine sand or glass dust into the wet coat about 1 hour after coating.
- Peeltex Grey
- Peeltex White
Working in a studio or art space instead? See studio and art space floors.
-
Spills and paint stay on top
They sit on the film, not in the floor. They leave with the film at wrap.
-
No tape lines
One sprayed skin means no tape edges to lift and no lines to pull up at strike.
-
No board seams to trip on
The film has no joints for a boot, a cart wheel or a cable to catch.
Stage floor protection questions
What does stage floor protection cost in NYC?
It is priced per production. Each quote covers material, labor, mobilization and a minimum job charge. The size of the floor and the schedule shape the number. Book a site walk, and we price what we see on the stage instead of guessing from a phone call.
Will paint and spills soak into the stage floor?
The film is sealed and contains spills, so scenic paint and spilled drinks stay on top of the film. They come off with it at wrap. Solvents and finishes are different. They get a small test patch first, so tell us what your scenic shop plans to use.
How long before the crew can load in?
Peeltex Grey is touch dry in about 2 hours in optimal conditions. Walk on and full cure times are not published, so we do not promise them. We set the schedule at the site walk and apply after hours, ahead of your load-in date.
Can the film handle heavy loads or hot work?
No. There is no published heat rating, and it is not impact protection, so keep it clear of hot work. Where heavy loads or dropped tools are expected, we use the Premium Assembly: felt backed board, with Peeltex Grey on the hard plastic top, run 6 inches up the wall.
Walk the stage with us before load-in
Tell us the venue, the run and the wrap date. We will look at the floor and quote the Stage Floor Package for your production.